Bromania Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{keywords>freebsd,netbsd,unix,fsck,startup,sbc,arm64}}
====== Automatic fsck -y at Startup ======

===== Environment =====

  * FreeBSD
  * NetBSD

===== Overview =====

If you are using a single board computer you may not have a serial connection set up to its console, or it may just not be connected to a monitor due to its location. If this is the case and, at some point, the computer powers off due to a power failure, an automatic **fsck -p** will start the next time the computer boots. If there are any errors that fsck is not comfortable fixing itself it will fail, the file system(s) will be marked as dirty, and the boot process will halt, prompting the user to enter single user mode to fix the issue with **fsck -f**. This is either not possible, or very inconvenient, for a headless setup.

===== FreeBSD =====

To tell FreeBSD to perform an **fsck -fy** to force a full check if the **fsck -p** fails, and to answer **yes** to any questions, add the following lines to **/etc/rc.conf**:

  fsck_y_enable="YES"
  background_fsck="NO"
  force_fsck="YES"
  force_fsck_list="/"

===== NetBSD =====

To force fsck to do a full check on each boot, and to answer affirmatively to any questions, add the following line to **/etc/rc.conf**:

  fsck_flags="-fy"